8X3w Laser Light moving head Light for Wedding
Any interests pls let us know,thank you!
Advantages:
1. It's available independently controlled and linkable with each other
for operation.
2. It is applicable for large-scale live performances,
theater, studio, nightclubs and discos.
3. 8+8 led red laser light which features high brightness and stability.
Specifications:
Voltage |
AC110-240V 50/60Hz |
Max Power |
80w |
Source |
8x3w led warm white, 8x3w led red laser,638nm_500mw |
LED working lifetime |
50000 hours |
Color temperature |
3200k |
Channel |
7/9/18/24 four channel mode |
Laser Pattern |
Various Thick Beam Effect Patterns |
Control mode |
DMX-512 signal control, self-propelled mode, sound |
control mode, Cooling system |
fan forced cooling system |
Working environment |
indoor |
Fixture size |
107*8*6.8CM |
Packing size(1in1) |
115*16*26cm |
N.W |
8.3kg |
Packing size(2in1) |
120*39*29cm |
G W |
19.5kg |
Thank you for choosing our products. For your own safety, please read this manual before installing the device. This manual
covers the important information on installation and applications. Please install and operate the fixture with following instructions, make sure the power is off before opening the light or repairing. Meanwhile, please keep this manual well for future needs.
It is made of a new type of high temperature strength of
engineering plastics and cast aluminum casing with nice outlook. The fixture is designed and manufactured strictly following CE
standards, complying with international standard DMX512 protocol.
Please carefully unpack it when you receive the fixture and
check whether it is damaged during the transportation. And please
check whether the following items are included inside the box
Operation Instructions:
-The moving head is for laser purpose. -Don't turn on the fixture if it's been through severe temperature
difference like after transportation because it might damage the
light due to the environment changes. So make sure to operate the
fixture until it is in normal temperature. -This light should be keep away from strong shaking during any
transportation or movement. -Don't pull up the light by only the head, or it might cause damages
to the mechanical parts. -Don't expose the fixture in overheat, moisture or environment with
too much dust when installing it. And don't lay any power cables
on the floor. Or it might cause electronic shock to the people. -Make sure the installation place is in good safety condition before
installing the fixture. -Make sure to put the safety chain and check whether the screws
are screwed properly when installing the fixture. -Make sure the lens are in good condition. It's recommended to
replace the units if there are any damages or severe scratch. -Make sure the fixture is operated by qualified personnel who
knows the fixture before using. -Keep the original packages if any second shipment is needed. -Don't try to change the fixtures without any instruction by the
manufacturer or the appointed repairing agencies. -It is not in warranty range if there are any malfunctions from not
following the user manual to operate or any illegal operation, like
shock short circuit, electronic shock, lamp broke, etc
Maintenance and Cleaning:
The following points have to be considered during the inspection:
1. All screws for installing the devices or parts of the device have to
be tightly connected and must not be corroded. 2. There must not be any deformations on the housing, color lenses,
fixations and installation spots (ceiling, suspension, trussing). 3. Mechanically moved parts must not show any traces of wearing
and must not rotate with unbalances. 4. The electric power supply cables must not show any damage, material fatigue or sediments. Further instructions depending on the installation spot and usage
have to be adhered by a skilled installer and any safety problems
have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the lights. 1) Clean the inside and outside lens each week to avoid the
weakneness of the lights due to accumulation of dust. 2) Clean the fan each week. 3) A detailed electric check by approved electrical engineer each
three month, make sure that the circuit contacts are in good
condition, prevent the poor contact of circuit from overheating. We recommend a frequent cleaning of the device. Please use a
moist, lint- free cloth. Never use alcohol or solvents.There are no
serviceable parts inside the device. Please refer to the instructions
under "Installation instructions".